Commonly Worn Parts of Tow Trucks

6 تن 10 جرثقیل بوم بند ویلرز (8)

کامیون یدک کشs play a vital role in clearing accident scenes, removing illegally parked vehicles, and assisting in rescue operations. These trucks typically consist of a specialized chassis and an upper structure. Based on the upper structure, they can be categorized into flatbed with two towing capabilities, integrated towing and lifting, and separate towing and lifting. This article focuses on the flatbed type with two towing capabilities and the commonly worn parts associated with this type of کامیون یدک کش.

SHACMAN M3000 21 جرثقیل بوم بند انگشتی تن (6)

1. Control Box

The control box houses the کامیون یدک کش‘s operating valves and is typically made of PVC, a type of plastic, making it relatively fragile. If the control box is damaged, it must be replaced. Different models of کامیون یدک کشs have different control boxes, primarily distinguished by the number of holes. Older models generally use a 6-hole control box, while more modern ones commonly use 5-hole or 8-hole boxes. When replacing the control box, it is crucial to check the number of holes to ensure compatibility.

SHACMAN 20 جرثقیل بوم بند انگشتی تن (5)

2. Straps/Tensioners

Straps are essential tools for towing with a کامیون یدک کش and are prone to wear and tear due to the inertia during towing, which can damage the straps over time. As the straps lose their elasticity, they can become a safety hazard, potentially causing secondary accidents. بنابراین, it is crucial to replace the straps once they lose their elasticity. There are two main types of straps:

  • A three-strap assembly used for securing vehicles on the flatbed.
  • A single strap with a tensioner used for securing the rear towing arm.

SHACMAN M3000 21 جرثقیل بوم بند انگشتی تن (4)

3. Steel Cable on the Hydraulic Winch

به طور کلی, the steel cable on a کامیون یدک کش‘s winch does not wear out easily, but it can develop burrs over time, indicating that the cable needs to be replaced. Burrs can form for several reasons:

  • Overloading:** The vehicle being towed is too heavy, exceeding the cable’s load capacity in a certain segment, causing the outer strands to break.
  • Deformation:** The steel cable deforms under stress, usually at the hook ring. This deformation concentrates the load at the contact points, leading to cable breakage.

 

Several brands of flatbed کامیون یدک کشس, such as Dayun Aopuli One-Two کامیون یدک کش, JAC Junling One-Two کامیون یدک کش, and Foton Ouma One-Two کامیون یدک کش, are popular in the market. کامیون یدک کش operators should pay close attention to these commonly worn parts and replace them promptly when damaged to ensure the safety and efficiency of their vehicles.

یک پاسخ بگذارید

آدرس ایمیل شما منتشر نخواهد شد. فیلدهای الزامی مشخص شده اند *