まとめ

• With 154 馬力, this tow truck offers strong power to handle a variety of towing tasks. It can easily pull disabled vehicles of different sizes and weights.
• The 4X2 drive configuration provides a good balance between traction and fuel efficiency. It allows the tow truck to move smoothly on various road surfaces.
• With an 8-ton towing capacity, it can handle medium-sized to large vehicles.

• It is designed with a specific towing capacity suitable for common breakdowns and accidents. The tow truck likely comes equipped with a winch system for pulling vehicles onto its flatbed or towing them directly.
• It may also have additional features such as tie-downs and storage compartments for tools and equipment needed for recovery operations.

• In urban areas, it can quickly respond to accidents and breakdowns, helping to clear the roads and reduce traffic congestion.
• On highways, it can assist in towing disabled vehicles to safety, ensuring the smooth flow of traffic.

• The operator’s cab is likely designed for comfort and convenience. It may have ergonomic seating and controls that allow the operator to work for extended periods without excessive fatigue.
• The controls are probably intuitive and easy to use, enabling the operator to perform towing and recovery operations efficiently.

特徴

• Powerful Engine: The 154-horsepower engine is a significant asset for this tow truck. It provides ample power to handle a wide range of towing tasks, ensuring that even heavy-duty vehicles can be towed with ease. The engine’s performance is reliable and consistent, enabling quick response times and smooth operation.
• 4X2 Drive for Versatility: 4X2 ドライブ構成により、トラクションと燃費のバランスが取れます。. It allows the tow truck to operate effectively on different road surfaces, from smooth city streets to rougher rural roads. The two-wheel drive on the rear axle provides sufficient power for towing, while the front wheels offer steering control and maneuverability.
• Enhanced Mobility: This drive setup makes the tow truck highly mobile, enabling it to reach the location of a disabled vehicle quickly and safely. It can navigate through tight spaces and congested areas with ease, making it ideal for urban environments as well as highways.

• Impressive 8-Ton Towing Capacity: With an 8-ton towing capacity, the Oumake 3 Series tow truck can handle a significant range of vehicle sizes. It is designed to deal with medium-sized to large vehicles, including trucks, SUVs, and commercial vans. The towing mechanism is engineered to be sturdy and reliable, capable of withstanding the stress of heavy loads.
• Winch System for Versatile Recovery: Equipped with a powerful winch system, the tow truck can perform a variety of recovery operations. The winch is typically strong enough to pull a vehicle onto the flatbed or tow it from a difficult location. It may have features such as variable speed control and a long cable length, providing flexibility in different recovery situations.
• Additional Equipment for Enhanced Functionality: In addition to the winch, the tow truck may come with other useful equipment. Tie-downs are often provided to secure the towed vehicle on the flatbed, preventing it from shifting during transport. Storage compartments may be available for tools and equipment needed for recovery operations, such as jumper cables, tire repair kits, and basic hand tools.

• Functional Flatbed or Towing Arrangement: The body of the tow truck is designed to facilitate easy loading and towing of disabled vehicles. If it has a flatbed, it is likely made of durable materials that can withstand the weight and stress of loading and transporting heavy vehicles. The flatbed may have ramps for easy vehicle access and tie-down points to secure the load.
• Thoughtful Design for Accessibility and Loading: The design of the tow truck takes into account the ease of loading and unloading disabled vehicles. The ramps, if present, are likely designed to be sturdy yet lightweight and easy to deploy. They may be adjustable to accommodate different vehicle heights and angles. The body may also have features such as side rails and non-slip surfaces to ensure the safety of the operator and the towed vehicle during loading and unloading. さらに, there may be lighting and signage on the body to enhance visibility during night operations or in low-light conditions.

• Safety in Towing Operations: The Oumake 3 Series tow truck is equipped with safety features to ensure a secure towing operation. Load-sensing systems may be in place to monitor the weight and balance of the towed vehicle. If the load exceeds safe limits or becomes unbalanced, the operator is alerted. The towing connections, such as the tow bar or winch cable, are designed with safety in mind, with features like locking mechanisms and high-strength materials to prevent accidental detachment.
• Stability Control Systems: The vehicle may have stability control systems and anti-lock brakes to enhance safety during towing and driving. These systems help to maintain the stability of the tow truck and prevent skidding or tipping, especially when towing heavy loads.
• Operator-Controlled Systems for Precision: The controls in the operator’s cab are designed for ease of use and precision. The operator can easily manage the winch, ramps, and other recovery equipment. The controls are likely ergonomically placed and intuitive, reducing the risk of operator error. There may also be safety interlocks and warning systems to prevent accidental activation of certain functions. The cab may be equipped with a rear-view camera or mirrors to provide a clear view of the towed vehicle and surrounding area, enhancing safety during towing operations.

• Comfortable Cab for Extended Operations: The operator’s cab is designed with the operator’s comfort in mind. Ergonomic seating provides proper support during long hours of operation, reducing fatigue. The cab is likely insulated from noise and vibration to create a more pleasant working environment. Climate-control systems may be installed to maintain a comfortable temperature inside the cab regardless of the external weather conditions.
• Visibility and Instrumentation for Optimal Performance: Good visibility is crucial for the operator during towing and recovery operations. The cab is designed with large windows and well-placed mirrors to provide a clear view of the surrounding area. The instrumentation panel may display important information such as engine status, towing load, and vehicle stability indicators. This information helps the operator make informed decisions and ensure safe and efficient operations. さらに, there may be communication systems in the cab to allow the operator to stay in touch with dispatchers or other emergency services.

仕様

基本情報
ドライブフォーム	4X2
ホイールベース	3800mm
Vehicle body size	7.54×2.4×2.28 メートル
総質量	8.28 トン
Vehicle mass	5.36 トン
Maximum speed	95km/h
Front wheel track/rear wheel track	Front track: 1685; Rear track:1615mm
フロントオーバーハング/リアオーバーハング	1120/2620 メートル
エンジンパラメータ
エンジン型式	Foton Cummins ISF3.8s4R154
変位	3.76L
最大馬力	154 馬力
最大出力電力	115kW
燃料の種類	ディーゼル
排出基準	National IV
Mounted Equipment Parameters
車両アナウンス	BSZ5089TQZ
マウントされた機器ブランド	Zhongyan brand
Lifting mass	2725kg
Transmission Parameters
トランスミッションモデル	651B
ギア数	6 歯車
Number of reverse gears	1
シャーシパラメータ
シャーシブランド	Foton Oumake
Chassis vehicle series	Oumake 3 series
シャーシモデル	BSZ5089TQZ
リアアクスルの説明	6T rear axle
リーフスプリングの数	9/11+7
タイヤ
タイヤの数	6
タイヤ仕様	7.50R16