მოკლე

• With 170 ცხენის ძალა, this wrecker has ample power to handle a wide range of towing tasks. Whether it’s a small car or a medium-sized truck, the engine provides the necessary force to pull disabled vehicles.
• The 4X2 drive configuration offers a good balance between traction and fuel efficiency. It allows the wrecker to move smoothly on different road surfaces and navigate through various terrains.

• It is designed with a certain towing capacity, suitable for handling common breakdowns and accidents. The wrecker likely comes equipped with a winch system for pulling vehicles onto its flatbed or towing them directly.
• It may also have additional features such as tie-downs and storage compartments for tools and equipment needed for recovery operations.

• In urban areas, it can quickly respond to accidents and breakdowns, helping to clear the roads and reduce traffic congestion. It can also be used in parking lots and garages to move vehicles that are in the way or have mechanical issues.
• On highways, it can assist in towing disabled vehicles to safety, ensuring the smooth flow of traffic.

• The operator’s cab is likely designed for comfort and convenience. It may have ergonomic seating and controls that allow the operator to work for extended periods without excessive fatigue.
• The controls are probably intuitive and easy to use, enabling the operator to perform towing and recovery operations efficiently.

მახასიათებლები

• Powerful Engine: The 170-horsepower engine is a significant strength of this wrecker. It provides ample power to handle a variety of towing tasks, from light-duty vehicles to medium-sized trucks. The engine’s power output ensures quick response times, enabling the wrecker to reach the location of a disabled vehicle promptly and start the recovery process without delay.
• 4X2 Drive for Versatility: The 4X2 drive configuration offers a balance between traction and fuel efficiency. It allows the wrecker to operate effectively on different road surfaces, including city streets, highways, and rural roads. The two-wheel drive on the rear axle provides sufficient traction for towing, while the front wheels offer steering control and maneuverability. This drive setup also makes the vehicle more fuel-efficient compared to larger drive configurations, reducing operating costs.

• Adequate Towing Capacity: The Xianglong wrecker is designed with a specific towing capacity that meets the needs of common vehicle recovery scenarios. It can handle a range of vehicle sizes and weights, ensuring that it can deal with different types of breakdowns and accidents. The towing mechanism is engineered to be sturdy and reliable, capable of withstanding the stress of pulling a disabled vehicle without compromising safety or performance.
• Winch System for Efficient Recovery: Equipped with a winch system, the wrecker can perform a variety of recovery operations. The winch is typically powerful enough to pull a vehicle onto the flatbed or tow it from a difficult location. It may have features such as variable speed control and a long cable length, providing flexibility in different recovery situations. The winch is also designed for durability and ease of use, with controls that are accessible and intuitive for the operator.
• Additional Equipment for Enhanced Functionality: In addition to the winch, the wrecker may come with other useful equipment. Tie-downs are often provided to secure the towed vehicle on the flatbed, preventing it from shifting during transport. Storage compartments may be available for tools and equipment needed for recovery operations, such as jumper cables, tire repair kits, and basic hand tools. These additional features enhance the wrecker’s functionality and make it more self-sufficient on the job.

• Functional Flatbed or Towing Arrangement: The body of the wrecker is designed to facilitate easy loading and towing of disabled vehicles. If it has a flatbed, it is likely made of durable materials that can withstand the weight and stress of loading and transporting vehicles. The flatbed may have ramps for easy vehicle access and tie-down points to secure the load. In some cases, the wrecker may have a towing mechanism that allows for traditional towing operations, with a tow bar or hitch that is compatible with different types of vehicles.
• Thoughtful Design for Accessibility and Loading: The design of the wrecker takes into account the ease of loading and unloading disabled vehicles. The ramps, if present, are likely designed to be sturdy yet lightweight and easy to deploy. They may be adjustable to accommodate different vehicle heights and angles. The body may also have features such as side rails and non-slip surfaces to ensure the safety of the operator and the towed vehicle during loading and unloading. დამატებით, there may be lighting and signage on the body to enhance visibility during night operations or in low-light conditions.

• Safety in Towing Operations: The Xianglong wrecker is equipped with safety features to ensure a secure towing operation. Load-sensing systems may be in place to monitor the weight and balance of the towed vehicle. If the load exceeds safe limits or becomes unbalanced, the operator is alerted. The towing connections, such as the tow bar or winch cable, are designed with safety in mind, with features like locking mechanisms and high-strength materials to prevent accidental detachment. The vehicle may also have stability control systems and anti-lock brakes to enhance safety during towing and driving.
• Operator-Controlled Systems for Precision: The controls in the operator’s cab are designed for ease of use and precision. The operator can easily manage the winch, ramps, and other recovery equipment. The controls are likely ergonomically placed and intuitive, reducing the risk of operator error. There may also be safety interlocks and warning systems to prevent accidental activation of certain functions. The cab may be equipped with a rear-view camera or mirrors to provide a clear view of the towed vehicle and surrounding area, enhancing safety during towing operations.

• Comfortable Cab for Extended Operations: The operator’s cab is designed with the operator’s comfort in mind. Ergonomic seating provides proper support during long hours of operation, reducing fatigue. The cab is likely insulated from noise and vibration to create a more pleasant working environment. Climate-control systems may be installed to maintain a comfortable temperature inside the cab regardless of the external weather conditions.
• Visibility and Instrumentation for Optimal Performance: Good visibility is crucial for the operator during towing and recovery operations. The cab is designed with large windows and well-placed mirrors to provide a clear view of the surrounding area. The instrumentation panel may display important information such as engine status, towing load, and vehicle stability indicators. This information helps the operator make informed decisions and ensure safe and efficient operations. დამატებით, there may be communication systems in the cab to allow the operator to stay in touch with dispatchers or other emergency services.

დაზუსტება

ძირითადი ინფორმაცია
წამყვანი ფორმა	4X2
ბორბლიანი ბაზა	4400მმ
Vehicle body size	8.57×2.48×2.53 meters
საერთო მასა	11.2 ტონა
სატრანსპორტო მასა	6.1 ტონა
მაქსიმალური სიჩქარე	90კმ/სთ
Front wheel track/rear wheel track	1804/1800მმ
წინა გადახურვა/უკანა გადახურვა	1.32/2.84 მეტრი
ძრავის პარამეტრები
ძრავის მოდელი	Yunnei Power D30TCIF1
გადაადგილება	3ლ
მაქსიმალური ცხენის ძალა	170 ცხენის ძალა
მაქსიმალური გამომავალი სიმძლავრე	125კვტ
საწვავის ტიპი	დიზელი
ემისიის სტანდარტი	National VI
Mounted Equipment Parameters
Vehicle announcement	HLH5111TQZCG6
დამონტაჟებული აღჭურვილობის ბრენდი	Dayun Light Truck
გადაცემის პარამეტრები
გადაცემის მოდელი	Fast 8-speed
გადაცემათა რაოდენობა	8 გადაცემათა კოლოფი
საპირისპირო გადაცემების რაოდენობა	1
შასის პარამეტრები
შასის ბრენდი	Dayun Light Truck
Chassis vehicle series	Xianglong
შასის მოდელი	CGC1110HDF44F
ფოთლოვანი ზამბარების რაოდენობა	9/9+6
საბურავები
საბურავების რაოდენობა	6
საბურავის სპეციფიკაცია	8.25R16