KRÓTKI

• With 170 moc w koniach mechanicznych, this wrecker has ample power to handle a wide range of towing tasks. Whether it’s a small car or a medium-sized truck, the engine provides the necessary force to pull disabled vehicles.
• The 4X2 drive configuration offers a good balance between traction and fuel efficiency. It allows the wrecker to move smoothly on different road surfaces and navigate through various terrains.

• It is designed with a certain towing capacity, suitable for handling common breakdowns and accidents. The wrecker likely comes equipped with a winch system for pulling vehicles onto its flatbed or towing them directly.
• It may also have additional features such as tie-downs and storage compartments for tools and equipment needed for recovery operations.

• In urban areas, it can quickly respond to accidents and breakdowns, helping to clear the roads and reduce traffic congestion. It can also be used in parking lots and garages to move vehicles that are in the way or have mechanical issues.
• On highways, it can assist in towing disabled vehicles to safety, ensuring the smooth flow of traffic.

• The operator’s cab is likely designed for comfort and convenience. It may have ergonomic seating and controls that allow the operator to work for extended periods without excessive fatigue.
• The controls are probably intuitive and easy to use, enabling the operator to perform towing and recovery operations efficiently.

CECHY

• Mocny silnik: The 170-horsepower engine is a significant strength of this wrecker. It provides ample power to handle a variety of towing tasks, from light-duty vehicles to medium-sized trucks. The engine’s power output ensures quick response times, enabling the wrecker to reach the location of a disabled vehicle promptly and start the recovery process without delay.
• 4X2 Drive for Versatility: The 4X2 drive configuration offers a balance between traction and fuel efficiency. It allows the wrecker to operate effectively on different road surfaces, including city streets, highways, and rural roads. The two-wheel drive on the rear axle provides sufficient traction for towing, while the front wheels offer steering control and maneuverability. This drive setup also makes the vehicle more fuel-efficient compared to larger drive configurations, reducing operating costs.

• Adequate Towing Capacity: The Xianglong wrecker is designed with a specific towing capacity that meets the needs of common vehicle recovery scenarios. It can handle a range of vehicle sizes and weights, ensuring that it can deal with different types of breakdowns and accidents. The towing mechanism is engineered to be sturdy and reliable, zdolne wytrzymać obciążenie związane z ciągnięciem unieruchomionego pojazdu bez uszczerbku dla bezpieczeństwa i wydajności.
• Winch System for Efficient Recovery: Wyposażony w system wyciągarki, niszczyciel może wykonać różne operacje odzyskiwania. The winch is typically powerful enough to pull a vehicle onto the flatbed or tow it from a difficult location. Może mieć takie funkcje, jak zmienna kontrola prędkości i długa długość kabla, providing flexibility in different recovery situations. The winch is also designed for durability and ease of use, z elementami sterującymi, które są dostępne i intuicyjne dla operatora.
• Dodatkowe wyposażenie zwiększające funkcjonalność: Oprócz wyciągarki, niszczyciel może być wyposażony w inny przydatny sprzęt. Tie-downs are often provided to secure the towed vehicle on the flatbed, preventing it from shifting during transport. Storage compartments may be available for tools and equipment needed for recovery operations, takie jak kable rozruchowe, zestawy do naprawy opon, i podstawowe narzędzia ręczne. These additional features enhance the wrecker’s functionality and make it more self-sufficient on the job.

• Funkcjonalna platforma lub układ holowniczy: Nadwozie wraku zostało zaprojektowane tak, aby ułatwić załadunek i holowanie pojazdów niepełnosprawnych. Jeśli ma platformę, jest prawdopodobnie wykonany z trwałych materiałów, które wytrzymują ciężar i naprężenia występujące podczas załadunku i transportu pojazdów. The flatbed may have ramps for easy vehicle access and tie-down points to secure the load. W niektórych przypadkach, the wrecker may have a towing mechanism that allows for traditional towing operations, with a tow bar or hitch that is compatible with different types of vehicles.
• Thoughtful Design for Accessibility and Loading: The design of the wrecker takes into account the ease of loading and unloading disabled vehicles. The ramps, if present, are likely designed to be sturdy yet lightweight and easy to deploy. They may be adjustable to accommodate different vehicle heights and angles. The body may also have features such as side rails and non-slip surfaces to ensure the safety of the operator and the towed vehicle during loading and unloading. Dodatkowo, there may be lighting and signage on the body to enhance visibility during night operations or in low-light conditions.

• Safety in Towing Operations: The Xianglong wrecker is equipped with safety features to ensure a secure towing operation. Load-sensing systems may be in place to monitor the weight and balance of the towed vehicle. If the load exceeds safe limits or becomes unbalanced, the operator is alerted. The towing connections, such as the tow bar or winch cable, are designed with safety in mind, with features like locking mechanisms and high-strength materials to prevent accidental detachment. The vehicle may also have stability control systems and anti-lock brakes to enhance safety during towing and driving.
• Operator-Controlled Systems for Precision: The controls in the operator’s cab are designed for ease of use and precision. The operator can easily manage the winch, ramps, and other recovery equipment. The controls are likely ergonomically placed and intuitive, reducing the risk of operator error. There may also be safety interlocks and warning systems to prevent accidental activation of certain functions. The cab may be equipped with a rear-view camera or mirrors to provide a clear view of the towed vehicle and surrounding area, enhancing safety during towing operations.

• Comfortable Cab for Extended Operations: The operator’s cab is designed with the operator’s comfort in mind. Ergonomic seating provides proper support during long hours of operation, reducing fatigue. The cab is likely insulated from noise and vibration to create a more pleasant working environment. Climate-control systems may be installed to maintain a comfortable temperature inside the cab regardless of the external weather conditions.
• Widoczność i oprzyrządowanie zapewniające optymalną wydajność: Dobra widoczność ma kluczowe znaczenie dla operatora podczas holowania i holowania. Kabinę wyposażono w duże okna i dobrze rozmieszczone lusterka, zapewniające dobrą widoczność otoczenia. Tablica przyrządów może wyświetlać ważne informacje, takie jak stan silnika, ładunek holowniczy, i wskaźniki stabilności pojazdu. Informacje te pomagają operatorowi podejmować świadome decyzje i zapewniać bezpieczne i wydajne działanie. Dodatkowo, there may be communication systems in the cab to allow the operator to stay in touch with dispatchers or other emergency services.

SPECYFIKACJA

Podstawowe informacje
Formularz jazdy	4X2
Rozstaw osi	4400mm
Vehicle body size	8.57×2.48×2.53 meters
Całkowita masa	11.2 mnóstwo
Masa pojazdu	6.1 mnóstwo
Maksymalna prędkość	90kilometrów na godzinę
Rozstaw kół przednich/rozstaw kół tylnych	1804/1800mm
Zwis przedni/zwis tylny	1.32/2.84 metrów
Engine Parameters
Model silnika	Yunnei Power D30TCIF1
Przemieszczenie	3L
Maksymalna moc	170 moc w koniach mechanicznych
Maksymalna moc wyjściowa	125kW
Rodzaj paliwa	Diesel
Norma emisji	Narodowy VI
Mounted Equipment Parameters
Ogłoszenie pojazdu	HLH5111TQZCG6
Mounted equipment brand	Dayun Light Truck
Transmission Parameters
Model transmisji	Fast 8-speed
Liczba biegów	8 koła zębate
Liczba biegów wstecznych	1
Chassis Parameters
Marka podwozia	Dayun Light Truck
Chassis vehicle series	Xianglong
Model podwozia	CGC1110HDF44F
Number of leaf springs	9/9+6
Opony
Liczba opon	6
Specyfikacja opon	8.25R16