รวบรัด

• With 156 แรงม้า, it has sufficient power to handle a variety of towing tasks. This engine power enables the wrecker to pull disabled vehicles with ease, whether they are small cars or medium-sized trucks.
• The 4X2 drive configuration provides a good balance between traction and fuel efficiency. It allows the wrecker to move smoothly on different road surfaces and navigate through various terrains.

• It is designed with a certain towing capacity, suitable for handling common breakdowns and accidents. The wrecker likely comes equipped with a winch system for pulling vehicles onto its flatbed or towing them directly.
• It may also have additional features such as tie-downs and storage compartments for tools and equipment needed for recovery operations.

• In urban areas, it can quickly respond to accidents and breakdowns, helping to clear the roads and reduce traffic congestion. It can also be used in parking lots and garages to move vehicles that are in the way or have mechanical issues.
• On highways, it can assist in towing disabled vehicles to safety, ensuring the smooth flow of traffic.

• The operator’s cab is likely designed for comfort and convenience. It may have ergonomic seating and controls that allow the operator to work for extended periods without excessive fatigue.
• The controls are probably intuitive and easy to use, enabling the operator to perform towing and recovery operations efficiently.

คุณสมบัติ

• Powerful Engine: The 156-horsepower engine provides a reliable source of power for the wrecker. This engine is capable of generating sufficient force to handle a wide range of towing tasks, from light-duty vehicles to medium-sized trucks. It offers smooth acceleration and consistent performance, ensuring that the wrecker can quickly respond to calls and reach the location of a disabled vehicle without delay.
• 4X2 Drive for Versatility: The 4X2 drive configuration offers several advantages. It provides decent traction on different road surfaces, allowing the wrecker to operate effectively in various environments. This drive setup also makes the vehicle more maneuverable, enabling it to navigate through tight spaces and crowded areas with ease. นอกจากนี้, it offers a relatively simple mechanical design, which can lead to lower maintenance costs and better reliability over time.

• Adequate Towing Capacity: The Aopuli wrecker is designed with a specific towing capacity that meets the needs of most common vehicle recovery scenarios. It can handle a variety of vehicle sizes and weights, ensuring that it can deal with different types of breakdowns and accidents. The towing mechanism is likely engineered to be sturdy and reliable, capable of withstanding the stress of pulling a disabled vehicle without compromising safety or performance.
• ระบบกว้านสำหรับการกู้คืนที่หลากหลาย: ติดตั้งระบบเครื่องกว้าน, Wrecker สามารถดำเนินการกู้คืนได้หลากหลาย. โดยทั่วไปแล้วเครื่องกว้านจะทรงพลังพอที่จะดึงยานพาหนะลงบนแฟลตหรือพ่วงโดยตรงจากตำแหน่งที่ยากลำบาก. มันอาจมีคุณสมบัติเช่นการควบคุมความเร็วตัวแปรและความยาวสายเคเบิลยาว, ช่วยให้มีความยืดหยุ่นมากขึ้นในสถานการณ์การกู้คืนที่แตกต่างกัน. เครื่องกว้านยังได้รับการออกแบบมาเพื่อความทนทานและความสะดวกในการใช้งาน, ด้วยการควบคุมที่สามารถเข้าถึงได้และใช้งานง่ายสำหรับผู้ปฏิบัติงาน.
• Additional Equipment for Enhanced Functionality: In addition to the winch, the wrecker may come with other useful equipment. This could include tie-downs to secure the towed vehicle on the flatbed, ensuring a safe and stable transport. There may also be storage compartments for tools and equipment needed for recovery operations, such as jumper cables, tire repair kits, and basic hand tools. These additional features enhance the functionality of the wrecker and make it more self-sufficient on the job.

• Functional Flatbed or Towing Arrangement: The body of the wrecker is designed to facilitate easy loading and towing of disabled vehicles. If it has a flatbed, it is likely made of durable materials that can withstand the weight and stress of loading and transporting vehicles. The flatbed may have features such as ramps for easy vehicle access and tie-down points to secure the load. In some cases, the wrecker may have a towing mechanism that allows for traditional towing operations, with a tow bar or hitch that is compatible with different types of vehicles.
• Thoughtful Design for Accessibility and Loading: The design of the wrecker takes into account the ease of loading and unloading disabled vehicles. The ramps, if present, are likely designed to be sturdy yet lightweight and easy to deploy. They may be adjustable to accommodate different vehicle heights and angles. The body may also have features such as side rails and non-slip surfaces to ensure the safety of the operator and the towed vehicle during loading and unloading. นอกจากนี้, there may be lighting and signage on the body to enhance visibility during night operations or in low-light conditions.

• Safety in Towing Operations: The Aopuli wrecker is equipped with several safety features to ensure a secure towing operation. There may be load-sensing systems that monitor the weight and balance of the towed vehicle. If the load exceeds safe limits or becomes unbalanced, the operator is alerted. The towing connections, such as the tow bar or winch cable, are likely designed with safety in mind, with features like locking mechanisms and high-strength materials to prevent accidental detachment. The vehicle may also have stability control systems and anti-lock brakes to enhance safety during towing and driving.
• Operator-Controlled Systems for Precision: The controls in the operator’s cab are designed for ease of use and precision. The operator can easily manage the winch, ramps, and other recovery equipment. The controls are likely ergonomically placed and intuitive, reducing the risk of operator error. There may also be safety interlocks and warning systems to prevent accidental activation of certain functions. The cab may be equipped with a rear-view camera or mirrors to provide a clear view of the towed vehicle and surrounding area, enhancing safety during towing operations.

• Comfortable Cab for Extended Operations: The operator’s cab is designed with the operator’s comfort in mind. It may feature ergonomic seating that provides proper support during long hours of operation. The cab is likely to be well-insulated from noise and vibration, creating a more pleasant working environment. There may also be climate-control systems to maintain a comfortable temperature inside the cab, regardless of the external weather conditions.
• Visibility and Instrumentation for Optimal Performance: Good visibility is crucial for the operator during towing and recovery operations. The cab is designed with large windows and well-placed mirrors to provide a clear view of the surrounding area. The instrumentation panel may display important information such as engine status, towing load, and vehicle stability indicators. This information helps the operator make informed decisions and ensure safe and efficient operations. นอกจากนี้, there may be communication systems in the cab to allow the operator to stay in touch with dispatchers or other emergency services.

ข้อมูลจำเพาะ

ข้อมูลพื้นฐาน
รูปแบบขับ	4X2
ระยะฐานล้อ	4400มม
Vehicle body size	7.8×2.3×2.75 meters
มวลรวม	9.995 ตัน
Vehicle mass	6.05 ตัน
Maximum speed	90km/h
Front wheel track/rear wheel track	Front: 1740มม; Rear:1640มม
ด้านหน้ายื่นออกมา/ด้านหลังยื่นออกมา	1.22/1.43 เมตร
Engine Parameters
รุ่นเครื่องยนต์	Yunnei Power D30TCIE4
การกระจัด	2.977ล
แรงม้าสูงสุด	156 แรงม้า
กำลังขับสูงสุด	115กิโลวัตต์
ชนิดเชื้อเพลิง	Diesel
มาตรฐานการปล่อย	National V
Mounted Equipment Parameters
Vehicle announcement	CGC5100TQZHDE41E
แบรนด์อุปกรณ์ที่ติดตั้ง	Dayun Light Truck
Transmission Parameters
รูปแบบการส่งสัญญาณ	WANLIYANG 6-speed
จำนวนเกียร์	6 เกียร์
Number of reverse gears	1
Chassis Parameters
แบรนด์แชสซี	Dayun Light Truck
Chassis vehicle series	Aopuli
รุ่นแชสซี	CGC1100HDE44E
จำนวนใบพัดใบ	9/9+6
ยาง
จำนวนยาง	6
ข้อมูลจำเพาะของยาง	8.25R16